Technological watch
KIT and Audi Launch Pilot Project for Chemical Recycling of Automotive Plastics
Written by AZoMDec 3 2020A large number of components in automobiles are made from plastics. They have to meet high safety, heat resistance, and quality requirements.
That is why so far only petroleum-based materials have been suitable for manufacturing plastic components in cars that are subjected to extremely high wear. In most cases, such materials cannot be recycled.
Whereas plastics of the same type can often be recycled mechanically, recycling of mixed plastic waste poses a major challenge.
The THINK TANK Industrial Resource Strategies of Karlsruhe Institute of Technology (KIT) and Audi are therefore launching a pilot project for chemical recycling in order to feed such mixed plastic fractions back into a resource-conserving circular system.
"Recycling automotive plastics has not yet been possible for many components. That is why we are doing pioneering work here together with Audi," says Professor Dieter Stapf, Head of KIT's Institute for Technical Chemistry, who also is involved in the THINK TANK.
"If we want to close these loops, we need to develop suitable methods." So far, chemical recycling has been the only method that can be used to convert such mixed plastic wastes into products, whose quality matches that of new products.
As a result, a wider range of plastics can be recovered, Stapf says. "Such closed material loops save valuable resources, because less primary material is required. This, in turn, saves energy and costs - and is beneficial to the environment," says Dr. Rebekka Volk from KIT's Institute for Industrial Production.
The pilot project "Chemical Recycling of Plastics in Automotive Engineering" is conducted by the THINK TANK Industrial Resource Strategies that has been established at KT by the Baden-Württemberg State Government together with industry and the support of academia.
"Responsible use of resources is the joint obligation of industry, science, and politics. The THINK TANK pools all competencies to master this big challenge and to serve society and the environment," says Professor Thomas Hirth, KIT Vice-President for Innovation and International Affairs and Spokesperson of the THINK TANK.
"Chemical recycling can be a major component of comprehensive plastics recycling. This makes it an interesting proposition for the automotive industry. The THINK TANK and Audi are jointly addressing a central issue of making automobiles more sustainable and environmentally friendly in future irrespective of their type of powertrain. The THINK TANK is focused on a holistic view of raw material loops," says Dr. Christian Kühne, Managing Director of the THINK TANK.
Related Stories
"We want to establish smart circular systems in our supply chains and make efficient use of resources," says Marco Philippi, Senior Director Procurement Strategy of Audi. "Chemical recycling has a great potential for this: If plastic components can be produced from pyrolysis oil instead of petroleum, it would be possible to significantly increase the proportion of sustainably manufactured components in automobiles. In the long run, this method can also play a role in end-of-life vehicle recycling."
The "Chemical Recycling of Plastics in Automotive Engineering" pilot project targets the creation of smart circular systems for plastics and establishing this method as a complement to mechanical recycling and replacement of energetic recovery.
Partnering with KIT's THINK TANK, Audi intends to initially test the technical feasibility of chemical recycling and to evaluate the method in terms of its economic efficiency and environmental impacts.
For this purpose, the company provides plastic components that are no longer needed, such as fuel tanks, wheel trim parts, and radiator grills, from Audi models returning from the German dealership network, for example.
The plastic components are processed to pyrolysis oil by chemical recycling. In the medium run, components based on pyrolysis oil can be used in automobiles again. If technical feasibility will be demonstrated, Audi will industrialize the technology and progressively apply it to more and more components.
Pyrolysis methods for more sustainable productsResearch and technology development for sustainable circular economy are major topics at KIT. "We are systematically studying the potentials of pyrolysis and how pyrolysis processes have to be designed on a large scale for maximum recycling of resources," Stapf says.
Chemical recycling of plastic wastes can help make modern products more sustainable and prevent greenhouse gas emissions.
That is why so far only petroleum-based materials have been suitable for manufacturing plastic components in cars that are subjected to extremely high wear. In most cases, such materials cannot be recycled.
Whereas plastics of the same type can often be recycled mechanically, recycling of mixed plastic waste poses a major challenge.
The THINK TANK Industrial Resource Strategies of Karlsruhe Institute of Technology (KIT) and Audi are therefore launching a pilot project for chemical recycling in order to feed such mixed plastic fractions back into a resource-conserving circular system.
"Recycling automotive plastics has not yet been possible for many components. That is why we are doing pioneering work here together with Audi," says Professor Dieter Stapf, Head of KIT's Institute for Technical Chemistry, who also is involved in the THINK TANK.
"If we want to close these loops, we need to develop suitable methods." So far, chemical recycling has been the only method that can be used to convert such mixed plastic wastes into products, whose quality matches that of new products.
As a result, a wider range of plastics can be recovered, Stapf says. "Such closed material loops save valuable resources, because less primary material is required. This, in turn, saves energy and costs - and is beneficial to the environment," says Dr. Rebekka Volk from KIT's Institute for Industrial Production.
The pilot project "Chemical Recycling of Plastics in Automotive Engineering" is conducted by the THINK TANK Industrial Resource Strategies that has been established at KT by the Baden-Württemberg State Government together with industry and the support of academia.
"Responsible use of resources is the joint obligation of industry, science, and politics. The THINK TANK pools all competencies to master this big challenge and to serve society and the environment," says Professor Thomas Hirth, KIT Vice-President for Innovation and International Affairs and Spokesperson of the THINK TANK.
"Chemical recycling can be a major component of comprehensive plastics recycling. This makes it an interesting proposition for the automotive industry. The THINK TANK and Audi are jointly addressing a central issue of making automobiles more sustainable and environmentally friendly in future irrespective of their type of powertrain. The THINK TANK is focused on a holistic view of raw material loops," says Dr. Christian Kühne, Managing Director of the THINK TANK.
Related Stories
- RF Proximity Sensors - Characteristics, Operation and Application in Materials Recycling
- Selecting a Lubricant for a Compressor in the Chemical Industry
- The Role of DMA in Plastics Analysis and Plastics Technology Research
"We want to establish smart circular systems in our supply chains and make efficient use of resources," says Marco Philippi, Senior Director Procurement Strategy of Audi. "Chemical recycling has a great potential for this: If plastic components can be produced from pyrolysis oil instead of petroleum, it would be possible to significantly increase the proportion of sustainably manufactured components in automobiles. In the long run, this method can also play a role in end-of-life vehicle recycling."
The "Chemical Recycling of Plastics in Automotive Engineering" pilot project targets the creation of smart circular systems for plastics and establishing this method as a complement to mechanical recycling and replacement of energetic recovery.
Partnering with KIT's THINK TANK, Audi intends to initially test the technical feasibility of chemical recycling and to evaluate the method in terms of its economic efficiency and environmental impacts.
For this purpose, the company provides plastic components that are no longer needed, such as fuel tanks, wheel trim parts, and radiator grills, from Audi models returning from the German dealership network, for example.
The plastic components are processed to pyrolysis oil by chemical recycling. In the medium run, components based on pyrolysis oil can be used in automobiles again. If technical feasibility will be demonstrated, Audi will industrialize the technology and progressively apply it to more and more components.
Pyrolysis methods for more sustainable productsResearch and technology development for sustainable circular economy are major topics at KIT. "We are systematically studying the potentials of pyrolysis and how pyrolysis processes have to be designed on a large scale for maximum recycling of resources," Stapf says.
Chemical recycling of plastic wastes can help make modern products more sustainable and prevent greenhouse gas emissions.
This project has been co-funded with the support of the LIFE financial instrument of the European Union [LIFE17 ENV/ES/000438] Life programme
The website reflects only the author's view. The Commission is not responsible for any use thay may be made of the information it contains.Last update: 2022-01-31
