Technological watch
Farasis Energy validates sustainable Direct Recycling process for lithium-ion batteries - Farasis Energy
Reducing waste and conserving resources by recovering and reusing valuable lithium-ion battery materials from used batteries and cell manufacturing scrap for new production – whilst maintaining cell performance and increasing sustainability.
Hayward (California), April 26, 2022 – For more than 10 years, Farasis Energy has been a pioneer in the research and development of a Direct Recycling process for used lithium-ion batteries. The recycling method enables direct recovery and reuse of valuable materials – notably the cathode powder – from these batteries and from cell manufacturing scrap. In particular, directly recovering the active cathode material powder retains the high value of the original engineered cathode material – one of the most expensive components in cell production – without the need for re-synthesis. This results in both cost and energy savings, and when applied to cell manufacturing scrap can improve the cathode powder utilization efficiency to over 99 percent. Farasis’ Direct Recycling process will enable lithium-ion cell production to become significantly more environmentally friendly and sustainable.
Direct Recycling of lithium-ion batteries is a unique recycling process in that it preserves the important crystal structure of the cathode material. Farasis has now been able to successfully demonstrate that recycled cathode material can be recovered from whole used cells or battery manufacturing scrap and then integrated into new cells. Farasis has shown that cells containing up to 25 percent recycled cathode material can exhibit equivalent performance to cells made from pure virgin cathode material. The Direct Recycling process thus makes it possible to significantly reduce the usage and quantity of new cathode active material without compromising the performance of the newly produced batteries. At the same time, it contributes to a more environmentally friendly and sustainable method of cell manufacturing while reducing the overall CO2 footprint. “Our goal is to develop a closed-loop value chain of the battery throughout its lifecycle – from design to end of life management,” says Dr. Keith Kepler, CTO and co-founder of Farasis. “We have made significant progress toward this goal with the validation of our direct recycling process.”
More than 10 years of research and development in battery recycling
Farasis Energy is a pioneer in research and development for Direct Recycling of lithium-ion batteries. As a leading supplier of innovative lithium-ion battery technology and pouch cells for electric mobility, Farasis has been working for more than 10 years to make lithium-ion battery manufacturing more environmentally friendly and sustainable. Recent advances in its Direct Recycling process development will enable Farasis to implement highly efficient, economically feasible recovery of the most valuable active materials from cells, batteries and battery manufacturing scrap. Farasis’ ongoing commitment to developing its recycling technology has led to two U.S. patents and multiple research grants, including a $1.76 million development contract awarded by the United States Advanced Battery Consortium (USABC).
Recycled cathode powder for reuse in electric vehicle battery cells
Modern batteries for electric vehicles contain a high proportion of NCM cathode materials, which typically accounts for 40 percent of the costs; “NCM” refers to the metals nickel, cobalt, and manganese. Most commercial recyclers of lithium-ion batteries focus on either high-temperature smelting or chemical dissolution of the carefully-engineered cathode material, and recovering only the individual metals. These recycling techniques are energy intensive and impart a significant negative impact to the environment. The Direct Recycling process, on the other hand, enables direct and complete recovery of the high-grade cathode material in its original crystalline form. And that means: the active material for cathodes is recovered intact and can be used directly again in the production of new lithium-ion cells. Farasis’ environmentally friendly Direct Recycling process thus eliminates the need for costly and energy-intensive re-synthesis of the cathode material from its basic components.
Farasis’ Direct Recycling processHigh demands on electrochemical excellence
In developing its Direct Recycling process, Farasis Energy placed a special focus on the performance of the recycled cathode material. This is because the production of new lithium-ion cells using active material for cathodes recovered from used cells has one prerequisite: that the cells containing recycled cathode powder have comparable characteristics and performance to those made from strictly virgin materials. Farasis has now demonstrated that up to 25 percent recycled cathode powder can be used in new lithium-ion cells without significantly impacting performance. Internal testing and external validation of sample 2Ah cells by a US-DOE National Laboratory have shown that even after 600 charge/discharge cycles the cells containing recycled cathode continue to perform similarly to their pristine counterparts. The next step is to validate certain cathode recycling process capabilities on a much larger scale, with the aim of enabling Farasis to begin recycling the cathode electrode scrap that is produced during cell manufacturing.
(Source: Idaho National Laboratory)About Farasis Energy
Farasis Energy is a developer and producer of high-performance lithium-ion battery technology and pouch cells for electric mobility and other power storage applications. Founded in California in 2002, the company now operates research and development centers in China, Germany and the USA. There are currently two production facilities in Ganzhou and Zhenjiang (China) with a current total capacity of 21 GWh/a. A third production facility with a targeted capacity of 24 GWh/a is currently under construction in Wuhu (China). A fourth production facility is under construction as a joint venture with Togg in Gemlik, Turkey. Besides Togg, Farasis Energy’s major strategic partners also include companies such as Daimler and Geely.
Press contact
Press Office Farasis Energy Europe
+ 49 7022 / 789 4411
press@farasis.com
Hayward (California), April 26, 2022 – For more than 10 years, Farasis Energy has been a pioneer in the research and development of a Direct Recycling process for used lithium-ion batteries. The recycling method enables direct recovery and reuse of valuable materials – notably the cathode powder – from these batteries and from cell manufacturing scrap. In particular, directly recovering the active cathode material powder retains the high value of the original engineered cathode material – one of the most expensive components in cell production – without the need for re-synthesis. This results in both cost and energy savings, and when applied to cell manufacturing scrap can improve the cathode powder utilization efficiency to over 99 percent. Farasis’ Direct Recycling process will enable lithium-ion cell production to become significantly more environmentally friendly and sustainable.
Direct Recycling of lithium-ion batteries is a unique recycling process in that it preserves the important crystal structure of the cathode material. Farasis has now been able to successfully demonstrate that recycled cathode material can be recovered from whole used cells or battery manufacturing scrap and then integrated into new cells. Farasis has shown that cells containing up to 25 percent recycled cathode material can exhibit equivalent performance to cells made from pure virgin cathode material. The Direct Recycling process thus makes it possible to significantly reduce the usage and quantity of new cathode active material without compromising the performance of the newly produced batteries. At the same time, it contributes to a more environmentally friendly and sustainable method of cell manufacturing while reducing the overall CO2 footprint. “Our goal is to develop a closed-loop value chain of the battery throughout its lifecycle – from design to end of life management,” says Dr. Keith Kepler, CTO and co-founder of Farasis. “We have made significant progress toward this goal with the validation of our direct recycling process.”
More than 10 years of research and development in battery recycling
Farasis Energy is a pioneer in research and development for Direct Recycling of lithium-ion batteries. As a leading supplier of innovative lithium-ion battery technology and pouch cells for electric mobility, Farasis has been working for more than 10 years to make lithium-ion battery manufacturing more environmentally friendly and sustainable. Recent advances in its Direct Recycling process development will enable Farasis to implement highly efficient, economically feasible recovery of the most valuable active materials from cells, batteries and battery manufacturing scrap. Farasis’ ongoing commitment to developing its recycling technology has led to two U.S. patents and multiple research grants, including a $1.76 million development contract awarded by the United States Advanced Battery Consortium (USABC).
Recycled cathode powder for reuse in electric vehicle battery cells
Modern batteries for electric vehicles contain a high proportion of NCM cathode materials, which typically accounts for 40 percent of the costs; “NCM” refers to the metals nickel, cobalt, and manganese. Most commercial recyclers of lithium-ion batteries focus on either high-temperature smelting or chemical dissolution of the carefully-engineered cathode material, and recovering only the individual metals. These recycling techniques are energy intensive and impart a significant negative impact to the environment. The Direct Recycling process, on the other hand, enables direct and complete recovery of the high-grade cathode material in its original crystalline form. And that means: the active material for cathodes is recovered intact and can be used directly again in the production of new lithium-ion cells. Farasis’ environmentally friendly Direct Recycling process thus eliminates the need for costly and energy-intensive re-synthesis of the cathode material from its basic components.
Farasis’ Direct Recycling processHigh demands on electrochemical excellence
In developing its Direct Recycling process, Farasis Energy placed a special focus on the performance of the recycled cathode material. This is because the production of new lithium-ion cells using active material for cathodes recovered from used cells has one prerequisite: that the cells containing recycled cathode powder have comparable characteristics and performance to those made from strictly virgin materials. Farasis has now demonstrated that up to 25 percent recycled cathode powder can be used in new lithium-ion cells without significantly impacting performance. Internal testing and external validation of sample 2Ah cells by a US-DOE National Laboratory have shown that even after 600 charge/discharge cycles the cells containing recycled cathode continue to perform similarly to their pristine counterparts. The next step is to validate certain cathode recycling process capabilities on a much larger scale, with the aim of enabling Farasis to begin recycling the cathode electrode scrap that is produced during cell manufacturing.
(Source: Idaho National Laboratory)About Farasis Energy
Farasis Energy is a developer and producer of high-performance lithium-ion battery technology and pouch cells for electric mobility and other power storage applications. Founded in California in 2002, the company now operates research and development centers in China, Germany and the USA. There are currently two production facilities in Ganzhou and Zhenjiang (China) with a current total capacity of 21 GWh/a. A third production facility with a targeted capacity of 24 GWh/a is currently under construction in Wuhu (China). A fourth production facility is under construction as a joint venture with Togg in Gemlik, Turkey. Besides Togg, Farasis Energy’s major strategic partners also include companies such as Daimler and Geely.
Press contact
Press Office Farasis Energy Europe
+ 49 7022 / 789 4411
press@farasis.com
This project has been co-funded with the support of the LIFE financial instrument of the European Union [LIFE17 ENV/ES/000438] Life programme
The website reflects only the author's view. The Commission is not responsible for any use thay may be made of the information it contains.Last update: 2022-01-31
