Technological watch
Mycelium can help us avoid packaging waste
Mycelium-based composite material (25 x 9 x 5.5 cm) made from straw, husks and starch. The biogenic substrate was 3-dimensionally intergrown and bound by the mycelium of the fungus Ganoderma resinaceum and the composite was then heat-dried and sanded. © Uni Göttingen/Michael UngerIt is easy to spot in mould with the naked eye: the fine mycelial network, which mostly grows hidden in the ground or in biomass. Mycelium possesses properties that can be very useful in avoiding environmentally harmful packaging waste. Scientists from the Universities of Göttingen and Bremen, as well as from the BIBA – Bremer Institut für Produktion und Logistik, are now researching new biodegradable mycelium composite materials for biodegradable packaging applications. They develop adapted production methods by keeping the entire product life cycle in mind and use artificial intelligence for promising material combinations.
Mycelium of the fungus Ganoderma resinaceum on a natural substrate consisting of loosely packed straw particles with an average length of 2 cm, which were previously broken down using a hammer mill. © Uni Göttingen/Michael UngerMycelium has the potential to transform biomass with its thread-like hyphae into a high-performance composite material. The goal of this project is to develop an integrated methodology for the material, process, and product development of mycelium composite materials. This methodology will address the current challenges of the product life cycle in terms of material selection, material preparation, recycling, and reuse.
The focus is specifically on the use of locally available organic residues and waste materials to enable short transport routes and sustainable production. These raw materials are sterilized in an energy-saving way, combined, and processed with consistent quality, so that production, use, and recycling are possible at the highest quality. Above all, the best possible material cycle should be guaranteed.
Mycelium-based composite material (25 x 9 x 5.5 cm) made from straw, husks and starch. The biogenic substrate was 3-dimensionally intergrown and bound by the mycelium of the fungus Ganoderma resinaceum and the composite was then heat-dried and sanded. © Uni Göttingen/Michael UngerResearch case study: Insulated cooler boxA concrete example of the use of mycelium-based materials is cooler boxes for shipping. For this purpose, the research project aims to implement a closed material cycle. It also examines the secondary use of the material as shredded bulk for shipping packaging and even as base material for further mycelium cooler boxes.
Utilizing artificial intelligenceAnother highlight of this project is the use of artificial intelligence (AI) to identify optimal starting material combinations and optimize process control. The use of the latest AI technologies ensures that the materials can be made efficiently and sustainably.
“Increasingly a success factor”Packaging waste in Germany has more than doubled in the past thirty years, and the trend is ongoing.
“Legal regulations also demand changes towards environmentally and climate-friendly products and processes,” says BIBA’s director and project initiator Professor Michael Freitag. “The use of new, ecologically safe materials and corresponding processes are becoming a success factor. The research in the ‘MycelCycle’ project with its holistic considerations are intended to contribute to more sustainable economic activity and an efficient and effective circular economy.”
Colony of the fungus Ganoderma resinaceum in a petri dish (9 cm diameter) on malt extract laboratory medium after 4 days of growth. In the centre is the inoculum, from which the colony spreads. The older area of the colony with strong cross-linking of the hyphae is bright white, followed by the younger area further out, in which rapid polar hyphae growth directed away from the inoculum takes place for substrate colonisation. ©Uni Göttingen/Michael UngerTransfer and dialogueAnother project goal is to share and disseminate the knowledge gained, exchange ideas constructively with all stakeholders from research and practice and thus receive new impulses. In this way, new opportunities for the development of mycelium products for various industries should also be recognized. For further information on this project and to participate in symposia and workshops, please contact:
Dr.-Ing. Michael Lütjen (BIBA)
phone: +49 421 218-50 123
email: ltj@biba.uni-bremen.de.
Key data about the project “MycelCycle”The 4-year research project “MycelCycle” (Integrated material, process and product development methodology for product life-cycle optimised mycelium-based packaging products as part of circular economy) is funded by the VolkswagenStiftung with 1.26 million euros. Research partners are the Department of Molecular Wood Biotechnology and Technical Mycology at the Faculty of Forest Sciences and Forest Ecology of the University of Göttingen, the Institute for Integrated Product Development (BIK) within the Faculty of Production Engineering – Mechanical Engineering and Process Engineering of the University of Bremen and the BIBA – Bremer Institut für Produktion und Logistik at the University of Bremen.
Mycelium of the fungus Ganoderma resinaceum on a natural substrate consisting of loosely packed straw particles with an average length of 2 cm, which were previously broken down using a hammer mill. © Uni Göttingen/Michael UngerMycelium has the potential to transform biomass with its thread-like hyphae into a high-performance composite material. The goal of this project is to develop an integrated methodology for the material, process, and product development of mycelium composite materials. This methodology will address the current challenges of the product life cycle in terms of material selection, material preparation, recycling, and reuse.
The focus is specifically on the use of locally available organic residues and waste materials to enable short transport routes and sustainable production. These raw materials are sterilized in an energy-saving way, combined, and processed with consistent quality, so that production, use, and recycling are possible at the highest quality. Above all, the best possible material cycle should be guaranteed.
Mycelium-based composite material (25 x 9 x 5.5 cm) made from straw, husks and starch. The biogenic substrate was 3-dimensionally intergrown and bound by the mycelium of the fungus Ganoderma resinaceum and the composite was then heat-dried and sanded. © Uni Göttingen/Michael UngerResearch case study: Insulated cooler boxA concrete example of the use of mycelium-based materials is cooler boxes for shipping. For this purpose, the research project aims to implement a closed material cycle. It also examines the secondary use of the material as shredded bulk for shipping packaging and even as base material for further mycelium cooler boxes.
Utilizing artificial intelligenceAnother highlight of this project is the use of artificial intelligence (AI) to identify optimal starting material combinations and optimize process control. The use of the latest AI technologies ensures that the materials can be made efficiently and sustainably.
“Increasingly a success factor”Packaging waste in Germany has more than doubled in the past thirty years, and the trend is ongoing.
“Legal regulations also demand changes towards environmentally and climate-friendly products and processes,” says BIBA’s director and project initiator Professor Michael Freitag. “The use of new, ecologically safe materials and corresponding processes are becoming a success factor. The research in the ‘MycelCycle’ project with its holistic considerations are intended to contribute to more sustainable economic activity and an efficient and effective circular economy.”
Colony of the fungus Ganoderma resinaceum in a petri dish (9 cm diameter) on malt extract laboratory medium after 4 days of growth. In the centre is the inoculum, from which the colony spreads. The older area of the colony with strong cross-linking of the hyphae is bright white, followed by the younger area further out, in which rapid polar hyphae growth directed away from the inoculum takes place for substrate colonisation. ©Uni Göttingen/Michael UngerTransfer and dialogueAnother project goal is to share and disseminate the knowledge gained, exchange ideas constructively with all stakeholders from research and practice and thus receive new impulses. In this way, new opportunities for the development of mycelium products for various industries should also be recognized. For further information on this project and to participate in symposia and workshops, please contact:
Dr.-Ing. Michael Lütjen (BIBA)
phone: +49 421 218-50 123
email: ltj@biba.uni-bremen.de.
Key data about the project “MycelCycle”The 4-year research project “MycelCycle” (Integrated material, process and product development methodology for product life-cycle optimised mycelium-based packaging products as part of circular economy) is funded by the VolkswagenStiftung with 1.26 million euros. Research partners are the Department of Molecular Wood Biotechnology and Technical Mycology at the Faculty of Forest Sciences and Forest Ecology of the University of Göttingen, the Institute for Integrated Product Development (BIK) within the Faculty of Production Engineering – Mechanical Engineering and Process Engineering of the University of Bremen and the BIBA – Bremer Institut für Produktion und Logistik at the University of Bremen.
This project has been co-funded with the support of the LIFE financial instrument of the European Union [LIFE17 ENV/ES/000438] Life programme
The website reflects only the author's view. The Commission is not responsible for any use thay may be made of the information it contains.Last update: 2022-01-31
